查看: 2151|回复: 0
打印 上一主题 下一主题

GI_Joe_U.S.S._Flagg 航空母舰3D打印模型

[复制链接]

29

主题

2

听众

507

积分

版主

Rank: 7Rank: 7Rank: 7

纳金币
58
精华
0

优秀版主 荣誉管理 论坛元老

跳转到指定楼层
楼主
发表于 2017-4-26 17:34:53 |只看该作者 |倒序浏览
0f2e550ad0a7aced70aa8d4eae2119a2_preview_featured.JPG
1b952743f451ec34c11420de5b02af32_preview_featured.JPG
1c06433f821d2856572bc5a7a23045f6_preview_featured.JPG
3ecf20d751d0adbe6e0837cd2c97372f_preview_featured.JPG
50f287938f382cd7c475189c8ae2bc2f_preview_featured.JPG
1717d9ea516b2630af7728ecbb722a35_preview_featured.JPG
5070a0c1d0b3e0d0fd3b949ed83f0745_preview_featured.jpg
b42bab2cb9dce05dd231ad66ed0fbd1a_preview_featured.JPG
db94de975a41c0704ecf627f98f49af7_preview_featured.JPG
de74367c182e4881a9307d0be201886f_preview_featured.JPG
f43de44cb8f70a8879bf175521ef76bb_preview_featured.JPG

Summary
The U.S.S. Flagg, sometimes called the holy grail of 80’s GI Joe toys. I did not have this toy as a kid (it was very expensive, around $100 in the Sears catalog) so I created these files based off of the blueprints that came with the toy and from pictures I found online. I wasn’t sure if I should make it a ‘playset’ (like the actual toy) or modify the design so that it was more like a real life functional ship. In the end, I decided to stay true to the 80’s toy and this is the result.

Like the other GI Joe models I’ve posted, the 3D files are full scale but intended to be printed at 25% scale. That said, the real toy was about 7 feet long (!) so this one comes in a little shorter than 2 feet. My printer is not big enough to make the hull and flight deck as one piece so I divided it up into sections and glued them together. I’ve included uncut versions in case you have a super-sized printer. This is a very challenging set of parts to put together but I tried to make it as easy as I could. I glued the hull together first, then glued the flight deck to the hull. If in doubt, look at pictures of the real toy online for reference.

a. The antenna array is printed with the base down, no supports.
b. The tower is printed base down, with supports.
c. The crane is printed base down, no supports. Be careful when removing from the print bed, the hook is delicate.
d. The captain’s launch is printed base down with supports.
e. I had the best luck printing the flight deck one section at a time, face up. For my first attempt I printed all four pieces at the same time, on edge and with supports. I did not like the result because the details filled in with support.
f. The turrets are printed base down, with supports. You will need 3.
g. The radar dishes are printed base down, no support needed. You will need 2.
h. The hull is printed in sections, with supports.

As always, much gratitude to the men and women who operate real equipment like this so people like me can live life in peace and safety.

This file is a free download. Please note that it is listed as “non-commercial”. Neither you nor I are allowed to buy or sell physical copies of this 3D model. You are allowed (and encouraged) to print copies for your own personal use. If you have been re-directed to this file from a source other than my site on thingiverse.com they have done so without my permission. Thank you for respecting the rights of the original copyright holder.

GI_Joe_U.S.S._Flagg_aircraft_carrier.zip (2.06 MB, 下载次数: 19)



分享到: QQ好友和群QQ好友和群 腾讯微博腾讯微博 腾讯朋友腾讯朋友 微信微信
转播转播0 分享淘帖0 收藏收藏0 支持支持0 反对反对0
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

手机版|纳金网 ( 闽ICP备2021016425号-2/3

GMT+8, 2024-9-21 15:47 , Processed in 0.886381 second(s), 34 queries .

Powered by Discuz!-创意设计 X2.5

© 2008-2019 Narkii Inc.

回顶部